2 tips-help you to avoid the troubles when designing your own plastic parts of pleated filter cartridges

Views : 3416
Author : indrofiltermachine.com
Update time : 2020-06-22 15:31:36
2 tips-help you to avoid the troubles when designing your own plastic parts of pleated filter cartridges
More and more manufacturers of pleated filter elements want to produce different filter cartridges from other manufacturers, so that their pleated filter cartridge can stand out in the market, easy to identify in the market, in order to improve their brand value. Therefore, many pleated filter element factories decide to design their own plastic parts of pleated filter cartridges. When we design our own pleated filter cartridges plastic parts including outer cage, inner core, end caps and fitting ends (adaptors), from the point of view of the filter production process, which should pay attention to it?
As a professional pleated filter production equipment supplier who has been focusing on pleated filter cartridges welding machines for more than 10years, we share with you the following two tips, it will help you to avoid troubles:
 
1. The dimensions should be compatible with most filters currently on the market.
 
2. The thickness of the welding surface shall be at least 3mm. If you choose infrared welding, the thickness of the welding surface should be at least 4mm. We also met some filter element manufacturers. In order to save costs, they bought plastic parts with very thin welding surface from the market. During the welding process, the filter element has a high probability of deformation, thus affecting the filter element's filtering efficiency, and it didn't pay off.
After considering the above 2 points, you can combine your own brand to design unique and suitable filter cartridges plastic parts.