Filter welder-pleated filter element production line
Views : 3993
Author : indrofiltermachine.com
Update time : 2019-11-13 13:49:44
Filter welder-pleated filter element production line
Filter welder-pleated filter element production line is required to be equipped with clean compressed air as the power, and the air pressure can be adjusted within the range of 0.4-1.8mpa. The electrical part of the filter element welding machine is divided into three parts: the temperature control system of the filter element heater, the temperature control system of the end cover heater and the PLC control system, which are powered by L1, L2, L3 three-phase five wire, L1 phase for the filter element heater, DC 24V power supply and PLC, L2 phase for the left end cover heater, L3 phase for the right end cover heater, Clear operation and distribution.
Advantages of filter welder-pleated filter element production line 1. The filter element welding machine can be applied to work pieces of different sizes without area limitation 2. The filter element welding machine can be applied to any welding surface without special requirements 3. Plastic allowance compensation can be allowed on the welding surface of filter element welding machine, and the welding strength is guaranteed 4. The filter element welding machine can adjust the welding procedure according to the needs of various materials 5. The clamp of filter element welding machine is fixed on the position of corresponding upper and lower pressing plates 6. The filter element welding machine, under the action of the power and positioning guide system of the upper and lower pressing plates, can make the rubber parts contact the hot stamping die for hot stamping at high speed, stably and without impact, so as to make the material of the joint surface of the rubber parts melt 7. The filter element welding machine can leave the hot stamping die smoothly and quickly in a short time 8. The filter element welding machine designs the heating plate, upper clamp and lower clamp of the hot stamping die as an independent assembly part, which is convenient for installation and handling
Filter welder-pleated filter element production line is applicable to the following products: automobile filter element, automobile filter, expansion kettle, automobile plastic, filter element of water dispenser, filter element end cover, filter barrel, filter barrel, circular product, PP product, and welding of various filter elements, etc
