if the pleated paper spreads out too earlier, how to resolve it?

Views : 3464
Author : indrofiltermachine.com
Update time : 2020-09-14 20:26:39
The filter media pleating and gluing process, after pleating, the pleated filter media will spread out, and go into gluing part to finish gluing and pleating process.
If the pleated filter media spreads out too early, the filter media will break easily and this will affect filter media transport very much. How to resolve this issue?
For pleating and gluing line, after pleating, the pleated paper will go to gluing part. Normally, when the pleated paper is moving to the position where close to the gluing part, the pleat spread out, this is doing goods for gluing smoothly.


If pleated paper spreads out too earlier, it will be not conducive to the transmission of filter paper, as well as the subsequent glue, especially for the fiberglass filter paper.
Then if the pleated paper spreads out too earlier, how to resolve it?
The main reason is the buffer is not enough.
Solutions:
  1. Make suitable working platform between pleating and gluing machine part.
  2. The speed of gluing is too higher, not matching the pleating speed. Keeping the gluing speed is same as pleating speed is to resolve above problem.