Equipment specification: 580 * 420 * 1200mm Working power supply: 220V 50Hz Working air pressure: P ≥ 0.6MPa Equipment weight: 67kg Equipment capacity: 1mode / 5S (Reference) Equipment drive: Pneumatic
Equipment parameters: delay time, welding time and curing time can be adjusted and controlled automatically. Filter welder-ultrasonic welding machine equipment introduction: the machine transforms electrical energy into ultrasonic energy through ultrasonic transducer (i.e. high frequency mechanical vibration energy whose frequency exceeds the hearing threshold of human ear), which is transmitted to the plastic work piece through the welding head, and melts the joint surface of the plastic work piece after severe friction with the ultrasonic frequency of tens of thousands of times per second and a certain amplitude. The short-term pressure maintained on the work piece after the vibration stops makes the two welded pieces solidify in the form of molecular link. Generally, the welding time is less than 1 second, and the welding strength obtained is comparable to that of the body. INDRO series ultrasonic plastic welding machine filter welder can be used for butt welding of thermoplastics, and can also change the welding head according to the needs of customers, which can be used for riveting, spot welding, embedding, cutting and other processing technologies. Application: welding of thermoplastics. Filter welder-ultrasonic welding machine equipment advantages: stable performance, convenient transportation, low energy consumption. Welding examples: filter cartridge middle seam welding, non woven fabrics, mobile phone parts welding, medical equipment welding and office supplies welding, etc.
