How to do debugging of air filter paper pleating and gluing line?
Views : 3523
Author : indrofiltermachine.com
Update time : 2020-09-03 16:01:57
How to do debugging of air filter paper pleating and gluing line?
The production line is debugged in three stages in the following order: Stage 01: Pleating debugging: including feeding, pre-cutting, pleating debugging. Pre-slitting vertical adjustment is not necessary at this stage. In general, polyester, polypropylene and cellulose filter media need to be pre-cut at this stage. Very few glass fiber filter paper is doing pre-cut at this stage. Whether you can pre-cut at this stage or not depends on the size of your filter specifications and filter media If you need to do a vertical cut in the last phase, the pre-cut debugging is not required at this time. Stage 02: gluing debugging: including gluing machine debugging, gluing holder /controller debugging. Stage 03: Cutting debugging: including cross cutting machine and platform cutting machine debugging. Please do debugging by 3 stages. After pleated debugging is completed and normal operation, start glue debugging, after glue debugging is completed and normal operation, start cutting debugging finally.
